Remote Control
R&S
®
FSVA/FSV
874Operating Manual 1176.7510.02 ─ 09
Mode: all
STATus:QUEStionable:DIQ:PTRansition <PTranstion>
Setting parameters:
<PTranstion> numeric value
Usage: SCPI confirmed
Mode: all
STATus:QUEStionable:FREQuency:CONDition?
This command queries the contents of the "CONDition" part of the
STATus:QUEStionable:FREQuency register (see "STATus:QUEStionable:FRE-
Quency Register" on page 596). Readout does not delete the contents of the "CONDi-
tion" part.
Example:
STAT:QUES:FREQ:COND?
Usage: Query only
Mode: all
STATus:QUEStionable:FREQuency:ENABle <BitDefinition>
This command sets the bits of the "ENABle" part of the
STATus:QUEStionable:FREQuency register. The "ENABle" register selectively
enables the individual events of the associated "EVENt" part for the summary bit.
Parameters:
<BitDefinition> 0 to 65535
Example:
STAT:QUES:FREQ:ENAB 65535
Mode: all
STATus:QUEStionable:FREQuency[:EVENt]?
This command queries the contents of the "EVENt" part of the
STATus:QUEStionable:FREQuency register.
Readout deletes the contents of the "EVENt" part.
Example:
STAT:QUES:FREQ?
Usage: Query only
Mode: all
Remote Control – Commands
To Next Page
Loading...
