Remote Control
R&S
®
FSVA/FSV
877Operating Manual 1176.7510.02 ─ 09
STATus:QUEStionable:LIMit<m>:PTRansition <BitDefinition>
This command sets the edge detectors of all bits of the
STATus:QUEStionable:LIMit register from 0 to 1 for the transitions of the "CONDi-
tion" bit.
Suffix:
<m>
.
1...4
window
For applications that do not have more than one measurement
window, the suffix is irrelevant.
Parameters:
<BitDefinition> 0 to 65535
Example:
STAT:QUES:LIM:PTR 65535
Mode: all, except NF
STATus:QUEStionable:LMARgin<m>[:EVENt]?
This command queries the contents of the "EVENt" part of the
STATus:QUEStionable:LMARgin register. Readout deletes the contents of the
"EVENt" part.
Suffix:
<m>
.
1...4
window
For applications that do not have more than one measurement
window, the suffix is irrelevant.
Example:
STAT:QUES:LMAR?
Usage: Query only
Mode: all
STATus:QUEStionable:LMARgin<m>:CONDition?
This command queries the contents of the "CONDition" part of the
STATus:QUEStionable:LMARgin register (see "STATus:QUEStionable:LMARgin
Register" on page 597). Readout does not delete the contents of the "CONDition" part.
Suffix:
<m>
.
1...4
window
For applications that do not have more than one measurement
window, the suffix is irrelevant.
Example:
STAT:QUES:LMAR:COND?
Usage: Query only
Mode: all
Remote Control – Commands
To Next Page
Loading...
