Remote Control
R&S
®
FSVA/FSV
878Operating Manual 1176.7510.02 ─ 09
STATus:QUEStionable:LMARgin<m>:ENABle <BitDefinition>
This command sets the bits of the "ENABle" part of the
STATus:QUEStionable:LMARgin register. The "ENABle" register selectively ena-
bles the individual events of the associated "EVENt" part for the summary bit.
Suffix:
<m>
.
1...4
window
For applications that do not have more than one measurement
window, the suffix is irrelevant.
Parameters:
<BitDefinition> 0 to 65535
Example:
STAT:QUES:LMAR:ENAB 65535
Mode: all
STATus:QUEStionable:LMARgin<m>:NTRansition
<BitDefinition>
This command sets the edge detectors of all bits of the
STATus:QUEStionable:LMARgin register from 1 to 0 for the transitions of the
"CONDition" bit.
Suffix:
<m>
.
1...4
window
For applications that do not have more than one measurement
window, the suffix is irrelevant.
Parameters:
<BitDefinition> 0 to 65535
Example:
STAT:QUES:LMAR:NTR 65535
Mode: all
STATus:QUEStionable:LMARgin<m>:PTRansition <BitDefinition>
This command sets the edge detectors of all bits of the
STATus:QUEStionable:LMARgin register from 0 to 1 for the transitions of the
"CONDition" bit.
Suffix:
<m>
.
1...4
window
For applications that do not have more than one measurement
window, the suffix is irrelevant.
Parameters:
<BitDefinition> 0 to 65535
Example:
STAT:QUES:LMAR:PTR 65535
Remote Control – Commands