Rohde & Schwarz FSVA - Page 940

Remote Control
R&S
®
FSVA/FSV
940Operating Manual 1176.7510.02 ─ 09
Parameters:
<FileName> 1,<file_name>
with <file_name> = DOS file name without extension
The file name includes indication of the path and may also
include the drive. The path name complies with DOS conven-
tions.
Example:
MMEM:CLE:STAT 1,'TEST'
Usage: Event
Manual operation: See "Delete File" on page 199
MMEMory:COMMent
<Comment>
This command defines a comment for the stored settings.
Parameters:
<Comment>
Example:
MMEMory:COMMent "ACP measurement with Standard
Tetra from 23.05."
MMEMory::MMEMory:STORe1:STATe 1, "ACP_T"
As a result, in the selection list for recall settings, the comment
"ACP measurement with Standard Tetra from
23.05." is added to the ACP entry.
Usage: SCPI confirmed
MMEMory:COPY <FileSource>,<FileDestination>
This command copies the files indicated in <file_source> to the destination directory
indicated with <file_destination> or to the destination file indicated by <file_destination>
if <file_source> is just a file.
Parameters:
<FileSource>,<FileDestination><file_source>,<file_destination> = <file_name>
<file_source>,<file_destination> = <file_name>
DOS file name
The indication of the file name may include the path and the
drive name. The file names and path information must be in
accordance with the DOS conventions.
Example:
MMEM:COPY 'C:\R_S\Instr\user\SETUP.CFG','E:'
Usage: Event
SCPI confirmed
Manual operation: See "Copy" on page 202
Remote Control – Commands