Instrument Function
R&S
®
SMB100A
98Operating Manual 1407.0806.32 ─ 13
The user name and password are required for remote access to the instrument via VNC,
FTP or SAMBA.
Remote command:
n.a.
Old Password (User Password)
Enters the currently used user password. The default password is "instrument".
Note: It is highly recommended to change the default user password before connecting
the instrument to the network.
New Password (User Password)
Enters the new security password.
The security password may contain decimal characters only.
Remote command:
n.a.
Confirm Password (User Password)
Enters the new password for conformation.
The new password is only valid after the "Change Password" button is pressed.
Remote command:
n.a.
Change Password (User Password)
Changes the password accordingly.
Remote command:
n.a.
Old Password (Security Password)
Enters the currently used security password. The default password is '123456'.
Note: It is highly recommended to change the default security password before connect-
ing the instrument to the network.
The security password is required when changing the status of the USB and LAN inter-
face.
Remote command:
n.a.
New Password (Security Password)
Enters the new security password.
The security password may contain decimal characters only.
Remote command:
n.a.
Confirm Password (Security Password)
Enters the new password for conformation.
General Instrument Settings
To Next Page
Loading...
