Instrument Function
R&S
®
SMB100A
99Operating Manual 1407.0806.32 ─ 13
The new password is only valid after the "Change Password" button is pressed.
Remote command:
n.a.
Change Password (Security Password)
Changes the password accordingly.
Remote command:
n.a.
LAN Services
Opens the "LAN Services" dialog for individually enabling or disabling the available LAN
interface services.
Enable LAN Interface ← LAN Services
Enables the LAN interface in general, and thus provides remote access via all unlocked
services.
The settings in this dialog require the entry of the Security Password, and are only
accepted after the Accept - Security button is pressed.
Enable LAN Services individually ← LAN Services
Enables or disables the following interface services individually.
"SCPI over LAN"
activates access over LAN to remotely control the instrument using
SCPI (Standard Commands for Programmable Instruments) com-
mands.
"VNC"
activates access via VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to remotely
control the instrument.
"SSH"
activates access via SSH (Secure Shell), a network protocol for secure
data communication.
"HTTP"
activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
"FTP"
activates access via FTP (File Transfer Protocol), used to transfer files
from a host to the instrument and vice versa.
General Instrument Settings
To Next Page
Loading...
