Rohde & Schwarz SMB100A - Page 179

Instrument Function
R&S
®
SMB100A
163Operating Manual 1407.0806.32 ─ 13
If this is not done, a previously learned hardware setting will continue to be used when
list mode is switched on ("State = On"). If no setting is available, e.g. when the list is used
for the first time, learning is automatically activated.
Remote command:
[:SOURce<hw>]:LIST:LEARn on page 330
List Mode Data... - List Mode
Calls the "File Select" menu for selecting and creating a list or the "File Manager".
Remote command:
[:SOURce<hw>]:LIST:SELect on page 332
[:SOURce<hw>]:LIST:DELete on page 322
[:SOURce<hw>]:LIST:DELete:ALL on page 322
Edit List Mode Data... - List Mode
Calls the editor for editing the selected list. A list consists of any number of frequency/
level value pairs. The currently selected list is displayed.
"Frequency /
Hz"
Enter the frequency of the frequency/power value pair.
Remote command:
[:SOURce<hw>]:LIST:FREQuency on page 327
"Power /dBm"
Enter the level of the frequency/power value pair.
Remote command:
[:SOURce<hw>]:LIST:POWer on page 331
"Goto"
Selects row for editing.
If "Goto row" is selected, a window opens for entering the requested
row.
RF Block