Rohde & Schwarz SMB100A - Page 198

Instrument Function
R&S
®
SMB100A
182Operating Manual 1407.0806.32 ─ 13
General Settings
State - Stereo Modulation
Activates/deactivates stereo modulation.
Remote command:
[:SOURce]:STEReo:STATe on page 376
FM Deviation - Stereo Modulation
Sets the MPX (Multiplex stereo signal) deviation.
Remote command:
[:SOURce]:STEReo[:DEViation] on page 377
Audio Source - Stereo Modulation
Selects the source for the audio signal.
"Off"
No audio signal is provided, ARI and RDS signal can be generated
separately.
"Ext L,R"
The external audio stereo signal is feed in via the analog L and R inputs.
"Ext S/P Diff"
The external audio signal is feed in via the digital S/P DIF input.
"LF Gen"
The audio stereo signal is internally generated by the LF generator.
Remote command:
[:SOURce]:STEReo:SOURce on page 376
Modulation