Rohde & Schwarz SMB100A - Page 217

Instrument Function
R&S
®
SMB100A
201Operating Manual 1407.0806.32 ─ 13
Column Separator- ASCII File Settings
Selects the separator between the frequency and level column of the ASCII table.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:COLumn
on page 362
Select ASCII Source / Destination - Import/Export Pulse Train Files
Calls the "File Manager" for selecting the ASCII file to be imported into a pulse train list
(source) or the ASCII file the pulse train list is exported (destination) in.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:CATalog? on page 360
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SELect on page 361
Select Destination / Source - Import/Export Pulse Train Files
Calls the "File Manager" for selecting the pulse train list to be exported (source) into an
ASCII file or the destination for the ASCII file to be imported (destination) in.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:SELect on page 364
Import / Export - Import/Export Pulse Train Files
Starts the export or import of the selected file.
If import is selected, the ASCII file is imported as pulse train list.
If export is selected, the pulse train list is exported into the selected ASCII file.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:EXECute on page 363
Modulation Generator and LF Output