Instrument Function
R&S
®
SMB100A
200Operating Manual 1407.0806.32 ─ 13
"Fill...."
Opens a sub menu for defining a set of list values to be automatically
entered in the list.
The start line and the number of rows to be filled are defined under
"From" and "Range".
The column to be filled is selected under "Select column to fill". Depend-
ing on the selection here, the default for start, end, and increment value
are set. As the settings are interdependent, a change of one parameter
may result in the automatic change of one or more of the other param-
eters.
The filling of the column with the selected value settings is started with
button "Fill".
"Delete Row"
Deletes the marked row.
"Delete Range"
Deletes the selected number of rows including the marked row. The
number of rows to be inserted can be defined in an entry window.
"Save As"
Open the file menu to save the list under a new name.
Each list is saved to the CpompactFlash
TM
card as a separate file with
the file prefix *.pulstrn. The file name and the directory to which the
file is saved are user-selectable.
"Save"
The list is saved under its current name.
Import/Export - Pulse Train Mode
Expands the menu with the area for import and export of pulse train files.
Externally edited Excel tables with on/off time and repetition triplets can be imported as
text files or CSV files and used for pulse train mode.
On the other hand, internally created pulse train lists can be exported as text files or CSV
files.
Mode – Import/Export Pulse Train Files
Selects if pulse train lists should be imported or exported. The settings offered below
depend on the selected mode.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:MODE on page 363
Extension – ASCII File Settings
Selects the file extension of the ASCII file to be imported or exported. Selection TXT (text
file) or CSV (Excel file) is available.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:EXTension on page 361
Decimal Point - ASCII File Settings
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Remote command:
[:SOURce<hw>]:PULM:TRAin:DEXChange:AFILe:SEParator:DECimal
on page 362
Modulation Generator and LF Output
To Next Page
Loading...
