Remote Control Commands
R&S
®
SMB100A
371Operating Manual 1407.0806.32 ─ 13
Parameters:
<Mode> LEFT | RIGHt | RELeft | REMLeft | RNELeft
LEFT
A mono signal containing the left channel is generated/fed in.
RIGHt
A mono signal containing the right channel is generated/fed in.
RELeft
A stereo signal with right and left channel is generated/fed in. The
channels have the same frequency and phase.
REMLeft
The signal on the left external audio input is used for both chan-
nels, left and right. The right channel is inverted.
RNELeft
(External source only)
A stereo signal containing different, independent right and left
channels is feed in. It is possible, for example, to feed a fixed audio
frequency to the first channel while a frequency sweep is being
performed in the second channel.
*RST:
RIGHt
Example:
STER:SOUR LFG
The internal LF generator is used as modulation source for the
audio signal.
STER:AUD:MODE RIGH
A mono signal containing the left channel is generated.
Options: R&S SMB-B5
Manual operation: See "Mode - Stereo Modulation" on page 183
[:SOURce]:STEReo:AUDio:PREemphasis <Preemphasis>
Sets the preemphasis used for signal generation.
Parameters:
<Preemphasis> float
Range: 50µs to 75µs
*RST: 50µs
Example:
STER:SOUR LFG
The internal LF generator is used as modulation source for the
audio signal.
STER:AUD:PRE 50µs
sets preemphasis to 50µs.
STER:AUD:PRE:STAT ON
activates preemphasis.
Options: R&S SMB-B5
Manual operation: See "Preemphasis - Stereo Modulation" on page 184
SOURce Subsystem
To Next Page
Loading...
