Operating displays
ENVI-MAG Manual A3-27
Instrument
REMOTE
A “yes/no” toggle that controls the
RS-232 port for receiving commands
from a data acquisition system, and for
sending data after each reading.
no
CYCLE
TIME
The reading interval of the base station.
The allowable range is 0 to 9999
seconds.
Entering 0 (zero) results in a reading
interval equal to the reading time.
The instrument goes to "sleep" between
readings, for 4 seconds and up.
0
CHART
SCALE
The sensitivity for the analog output for
the strip chart recorder.
The following choices are available:
1, 10, 100, 1000, 10000 nT.
1
Parameter Description Default
To Next Page
Loading...