SICK Lector62 Series User Manual

355 Beeper
The event that activates the beeper is selected via the Beeper parameter.
•
GOOD READ: The beeper sounds if the read operation was successful.
•
NO READ: The beeper sounds if the read operation was unsuccessful.
•
TEACH-IN 1 OK: The beeper sounds if the MATCH CODE TEACH-IN 1 has been successfully
taught in.
•
TEACH-IN 1 NOK: The beeper sounds if the MATCH CODE TEACH-IN 1 could not be success‐
fully taught in.
•
TEACH-IN 2 OK: The beeper sounds if the MATCH CODE TEACH-IN 2 has been successfully
taught in.
•
TEACH-IN 2 NOK: The beeper sounds if the MATCH CODE TEACH-IN 2 could not be success‐
fully taught in.
•
MATCH 1 CONDITIONS: The beeper sounds if the code that has been read corresponds
to the MATCH 1 CONDITION match code.
•
MULTICODES1 CONDITION: The beeper sounds if the number of codes that have been
read corresponds to the number specified by the MULTICODES1 CONDITION.
•
TEACH-IN1 CONDITIONS: The beeper sounds if the code that has been read corre‐
sponds to the TEACH-IN1 CONDITION match code.
•
TEACH-IN2 CONDITIONS: The beeper sounds if the code that has been read corre‐
sponds to the TEACH-IN2 CONDITION match code.
356 SVP
The SVP data output can be activated in the SVP group.
The SVP (SICK Visualization Platform) is a dynamic database used to monitor, analyze,
and evaluate all the information, including camera images and videos that are captured
using automatic SICK data collection systems.
SOPAS PARAMETER OVERVIEW
118
O N L I N E H E L P | Lector62x 8013778/YPV6/2016-01-14 | SICK
Subject to change without notice

SICK Lector62 Series Specifications

General

Brand	SICK
Model	Lector62 Series
Category	Barcode Reader
Language	English