SICK Lector62 Series User Manual

Software version
The Software version display field shows the version of the firmware installed.
Order number
The Bestellnummer display field shows the sensor order number.
Serial number
The Serial number display field shows the sensor serial number.
189 Device Name
A name is assigned to the device via the Device Name parameter. The device name
appears in SOPAS in the project tree.
It is not compulsory to assign a device name, but it can offer a better overview of all
devices in the system during the configuration process.
190 Device Time
Synchronization of the device time is defined via the parameters in the Device Time
group.
By entering a time source that the device can use to synchronize itself, it is possible to
analyze the reading results exactly at the end of the recording period.
The current time on the connected reading device can be retrieved via the GET CURRENT
TIME button.
191 Speed
The maximum transmission rate for data sent by the sensor can be adjusted in line
with the speed of the network via the Speed parameter.
To ensure a reliable connection, we recommend determining the speed of your directly
connected PC automatically (AUTO).
SOPAS PARAMETER OVERVIEW
72
O N L I N E H E L P | Lector62x 8013778/YPV6/2016-01-14 | SICK
Subject to change without notice

SICK Lector62 Series Specifications

General

Brand	SICK
Model	Lector62 Series
Category	Barcode Reader
Language	English