SICK Lector62 Series User Manual

183 Function
The Function parameter specifies how the device should function within the SICK net‐
work in master/slave operating mode.
•
STAND ALONE: The reading device is not integrated into a SICK network and operates
as a single device station in the system. The device communicates directly with
the host.
•
SLAVE: When configured as a slave, the reading device receives trigger signals for
starting and ending the reading process from the master. The slave sends the
reading result to the master.
•
MASTER: When configured as the master, the reading device distributes trigger sig‐
nals for starting and ending the reading process to the slaves. The master receives
the trigger signals directly from a photoelectric switch or serially from the PLC.
Once it receives the reading results from the slaves, the master sends these to the
PLC in accordance with the configured output format.
Slave list
The Slave list parameter is used to specify the device IDs of the slaves that are con‐
nected to the master device. The device IDs are separated by commas. Up to ten slaves
can be entered for one master.
NOTE
The input field is highlighted in red if an invalid entry is made.
SOPAS PARAMETER OVERVIEW
8013778/YPV6/2016-01-14 | SICK O N L I N E H E L P | Lector62x
69
Subject to change without notice

SICK Lector62 Series Specifications

General

Brand	SICK
Model	Lector62 Series
Category	Barcode Reader
Language	English