SICK Lector62 Series User Manual

53 Condition for image storing
The Condition for image storing parameter is used to select the condition that must be
met for images to be stored for diagnostic purposes.
•
GOOD READ: Only images resulting from a successful code reading operation are
stored.
•
NO READ: Only images resulting from an unsuccessful code reading operation are
stored.
•
ALL: All captured images are stored.
•
MATCH 1 CONDITION: The captured images are only stored if the code that has been
read corresponds to the MATCH 1 CONDITION match code.
•
MULTICODES1 CONDITION: The captured images are only stored if the number of codes
that have been read corresponds to the number specified by the MULTICODES1 CONDI‐
TION.
•
TEACH-IN1 CONDITION: The captured images are only stored if the Match-code teach-in
1 condition is met.
•
TEACH-IN2 CONDITION: The captured images are only stored if the Match-code teach-in
2 (Additional) condition is met.
54 Condition for Good Read
The Condition for Good Read list box is used to define the condition that must be met in
order for a read operation to be evaluated as "good" (GOOD READ).
•
USE MIN./MAX. NUMBER OF CODES: Depending on how the Check min. number of valid
codes and Check max. number of valid codes parameters are configured, a read
operation is evaluated as "good" (GOOD READ) if the number of codes read falls
between the minimum and maximum values specified.
•
MATCH1 CONDITION: The read operation is evaluated as "good" (GOOD READ) if the code
that has been read corresponds to MATCH CODE MATCH 1.
•
MULTICODES1 CONDITION: The read operation is evaluated as "good" (GOOD READ) if the
number of codes that have been read corresponds to the specified number.
•
TEACH-IN1 CONDITION: The read operation is evaluated as "good" (GOOD READ) if the
code that has been read corresponds to MATCH CODE TEACH-IN 1.
•
TEACH-IN2 CONDITION: The read operation is evaluated as "good" (GOOD READ) if the
code that has been read corresponds to MATCH CODE TEACH-IN 2.
55 Invert condition
A condition can be inverted using the Invert condition parameter. Inverting a condition
allows all code content to be approved except the taught-in match code content.
With this function, it is possible to prevent a particular product from leaving the produc‐
tion line.
SOPAS PARAMETER OVERVIEW
8013778/YPV6/2016-01-14 | SICK O N L I N E H E L P | Lector62x
31
Subject to change without notice

SICK Lector62 Series Specifications

General

Brand	SICK
Model	Lector62 Series
Category	Barcode Reader
Language	English