Index
Index-2
Programmable Logic Controllers S7-300 Module Data
A5E00105505-03
Analog Output Module, SM 332;
AO 2 x 12 bits, 4-182
Analog output module
connecting loads and actuators, 4-66
connecting loads to current output, 4-70
connecting loads to voltage output, 4-67
diagnostic interrupt, 4-43
diagnostic messages, 4-73
diagnostics, 4-43
group diagnostics, 4-43
isolated, 4-66
load voltage missing, 4-74
M short-circuit, 4-74
non-isolated, 4-66
output methods and output ranges, A-38
output range, 4-43
output type, 4-43
parameter assignment error, 4-74
parameters, 4-43
response with CPU-STOP, 4-43
setting substitute values, A-38
settling time, 4-38
SM 332; AO 4 x 12 bits, 4-176
SM 332; AO 4 x 16 bit, 4-169
SM 332; AO 8 x 12 bits, 4-163
structure of data record 1, A-37
analog output module, response time, 4-38
Analog output modules
causes of errors and remedies, 4-74
parameters, A-36
Analog output modules, SM 332,
channel-specific diagnostic data, B-6
Analog value
conversion, 4-9
sign, 4-9
Analog value representation, 4-9
binary representation of input ranges, 4-12
binary representation of output ranges, 4-24
for current measuring ranges, 4-14–4-17
for current output ranges, 4-27–4-30
for resistance type transmitters, 4-15
for RTD Resistance Temperature Detectors,
4-16, 4-17, 4-19, 4-20, 4-21, 4-22, 4-23
for RTD resistance temperature detectors,
4-18
for voltage measuring ranges, 4-13–4-15
for voltage output ranges, 4-26–4-29
Analog-to-digital conversion, 4-35
Approval
CE, 1-2
CSA, 1-3
FM, 1-4
Shipbuilding, 1-4
UL, 1-3
Approvals, Standards, 1-2
Auxiliary supply missing, SM 338; POS-INPUT,
5-19
B
Backplane bus, Glossary-1
Backup battery, 1-9
shipping and storage conditions, 1-8
Basic conversion time, Glossary-1
Basic error limit, 4-34
Basic response time, Glossary-1
Battery. See backup battery
Baud rate, SM 338; POS-INPUT, 5-14
Behavior, SM 321; DI 16 x 24 VDC, 3-29
Bus segment, Glossary-1
Bytes 0 and 1
of diagnostic data, B-2
of diagnostic data for SM 338; POS-INPUT,
B-7
Bytes 2 and 3, of diagnostic data, B-3
Bytes 2 to 7, of diagnostic data for SM 338;
POS-INPUT, B-8
Bytes 4 to 7, of diagnostic data, B-4
Bytes 8 to 10, of diagnostic data for SM 338;
POS-INPUT, B-8
C
Cables, for analog signals, 4-45, 4-66
Causes of error and remedial action, SM 322;
DO 8 x 24 VDC/0.5 A, 3-79
Causes of error and remedial measures,
SM 321; DI 16 x 24 VDC, 3-31
Causes of Errors and Remedial Measures,
SM 338; POS-INPUT, 5-19
Causes of errors and remedies
analog input module, 4-73
analog output module, 4-74
CE, Approval, 1-2
Channel error, SM 338; POS-INPUT, 5-19
Channel information present, SM 338;
POS-INPUT, 5-19
Channel-specific diagnostics, B-5
Climatic conditions, 1-11
Code type, SM 338; POS-INPUT, 5-14
Commissioning analog modules, sequence of
steps, 4-8
Commissioning digital modules, sequence of
steps, 3-10
Common mode voltage, Glossary-2
Common-mode error, analog input module,
4-73
Communication processor, Glossary-2
Comparison point, 4-62, Glossary-2
To Next Page
Loading...
