EasyManuals Logo

STONEX R2 User Manual

STONEX R2
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
STONEX R2
2
PRECAUTIONS
1. Do not collimate the objective lens direct to sunlight without a filter.
2. Do not store the instrument in high and low temperature to avoid the sudden or great
change of temperature.
3. When the instrument is not in use, place it in the case and avoid shock, dust and
humidity.
4. If there is great difference between the temperature in work site and that in store place,
you should leave the instrument in the case till it adapts to the temperature of
environment.
5. If the instrument has not been used for a long time, you should remove the battery for
separate storage. The battery should be charged once a month.
6. When transporting the instrument should be placed in its carrying case, it is
recommended that cushioned material should be used around the case for support.
7. For less vibration and better accuracy, the instrument should be set up on a wooden
tripod rather than an aluminum tripod.
8. Clean exposed optical parts with degreased cotton or lens tissue only!
9. Clean the instrument surface with a woolen cloth after use. If it gets wet, dry it
immediately.
10. Before working, inspect the power, functions and indications of the instrument as well
as its initial settings and correction parameters.
11. Unless the user is a maintenance specialist, do not attempt to disassemble the
instrument by yourself even if you find the instrument abnormal.
12. Since Reflectorless Total Station R2 emits visible laser, do not sight the eyes in
use.
SAFETY GUIDE
Internal EDM (Visible Laser)
Warning:
The total station is equipped with an EDM of a laser grade of 3R/a. It is verified by the
following labels.
On the vertical tangent screw sticks an indication label CLASS III LASER PRODUCT”.
A similar label is sticked on the opposite side.
This product is classified as Class 3R laser product, which accords to the following
standards.
IEC60825-1:2001 “SAFETY OF LASER PRODUCTS”.
Class 3R/ a laser product: It is harmful to observe laser beam continuously. User
should avoid sighting the laser at the eyes. It can reach 5 times the emitting limit of
Class2/II with a wavelength of 400mm-700mm.
Warning:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the STONEX R2 and is the answer not in the manual?

STONEX R2 Specifications

General IconGeneral
BrandSTONEX
ModelR2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals