Toro TX525 - Page 308

HYDRAULIC SYSTEM
6-45TX525 Service Manual Rev. 000
5. Using a needle nose pliers grab the center of the
inner small bushing and lift it partially out of the
pump housing (Fig. 0998).
7. Lift the inner small bushing out of the pump housing
(Fig. 1000).
Fig 0998 PICT-2834a
Fig 1000 PICT-2836
1. Lift the pump housing off the 14 gpm pump housing
(Fig. 1001).
6. Mark the inner small bushing assembly with a line
that extends out onto the pump housing. This line
should be on the opposite side as the previous
marking (Fig. 0999).
Fig 1001 PICT-2838a
Fig 0999 PICT-2835
14 gpm Pump Disassembly