Toro TX525 - Page 468

DRIVE SYSTEM
7-91TX525 Service Manual Rev. 000
7. Secure the tensioner wheel in a vise.
8. Drive one of the bearings out using a punch and
hammer (Fig. 1601).
Fig 1601 PICT-4510a
9. Turn the wheel over and drive the second bearing
out using a punch and hammer (Fig. 1602).
Fig 1602 PICT-4513a
6. Remove the outer washer, tensioner wheel and inner
washer (Fig. 1600).
Fig 1600 PICT-4443