BRAKES
8-31TX525 Service Manual Rev. 000
19. Position the fuel tank bracket onto the fuel tank (Fig.
1750).
Fig 1750 PICT-5626
18. Position the fuel tank into the rear end of the frame.
Connect the two wires (black and orange) to the fuel
sending unit located on the top of the fuel tank (Fig.
1749).
Fig 1749 PICT-4262a
A. Center terminal (orange wire)
B. Outside terminal (black wire)
A
B
20. Position the rear frame cover to the rear end of the
frame. Using 3/4” and 1/2” sockets, install 7 bolts
and nuts to secure the rear frame cover to the frame
and fuel tank bracket (Fig. 1751).
Note: The rear of the machine may have to be lifted
to reposition the jack stands so that the rear
frame cover can be installed.
Fig 1751 PICT-4259
To Next Page
Loading...
