T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
85
Parameter
string —— Enter the sub-option Remote ID, which contains 63 characters at
most.
Command Mode
Global Configuration Mode
Example
Configure the customized sub-option Remote ID for the Option 82 as tplink:
T3700G-28TQ(config)#ip dhcp snooping information remote-id tplink
ip dhcp snooping information circuit-id
Description
The ip dhcp snooping information circuit-id command is used to enable and
configure the customized sub-option Circuit ID for the Option 82. To return to the
default Circuit ID for the Option 82, please use no ip dhcp snooping
information circuit-id command.
Syntax
ip dhcp snooping information circuit-id string
no ip dhcp snooping information circuit-id
Parameter
string —— Enter the sub-option Circuit ID, which contains 63 characters at
most.
Command Mode
Global Configuration Mode
Example
Enable and configure the customized sub-option Circuit ID for the Option 82 as
“tplink”:
T3700G-28TQ(config)#ip dhcp snooping information circuit-id tplink
To Next Page
Loading...
