TP-Link JetStream T3700G-28TQ - Show Ip Route Ospf; Show Ip Ospf Area Database

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
386
show ip route ospf
Description
The show ip route ospf command is used to display the OSPF routing table.
Syntax
show ip route ospf [ process-id ]
Parameter
process-id —— The process ID, ranging from 1 to 65535. The routing tables of
all OSPF processes will be displayed if no process ID is specified.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the routing tables of all the OSPF processes:
T3700G-28TQ# show ip route ospf
show ip ospf area database
Description
The show ip ospf area database command is used to display the LSDB of the
specified area. The detailed LSA information will be displayed if the LSA type is
specified. The LSDB summary information will be displayed if the LSA type is
not specified.
Syntax
show ip ospf process-id area area-id database [ asbr-summary | external |
network | nssa-external | router | summary ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id —— The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
asbr-summary | external | network | nssa-external | router | summary —— The
LSA type.