T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
104
Parameter
server-timeout time ——The maximum time for the switch to wait for the
response before resending a request to the server, ranging from 1 to 9 in
second. By default, it is 3 seconds.
supplicant-timeout time ——The maximum time for the switch to wait for the
response from supplicant before resending a request to the supplicant., ranging
from 1 to 9 in second. By default, it is 3 seconds.
Command Mode
Global Configuration Mode
Example
Configure the server’s timeout value as 5 seconds:
T3700G-28TQ(config)#dot1x timeout server-timeout 5
dot1x max-reauth-req
Description
The dot1x max-reauth-req command is used to configure the maximum
transfer times of the repeated authentication request when the server cannot be
connected. To restore to the default value, please use no dot1x
max-reauth-req command.
Syntax
dot1x max-reauth-req times
no dot1x max-reauth-req
Parameter
times —— The maximum transfer times of the repeated authentication request,
ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Example
Configure the maximum transfer times of the repeated authentication request as
5:
T3700G-28TQ(config)#dot1x max-reauth-req 5
To Next Page
Loading...
