TP-Link JetStream T3700G-28TQ - ip pim rp-address; ip pim bsr-border

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
306
Syntax
ip igmp robustness robustness
no ip igmp robustness
Parameter
robustness —— Specify the robustness of IGMP. The default value is 2.
Command Mode
Interface Configuration Mode
Example
Configure the robustness of IGMP as 3 on Interface VLAN 2:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip igmp robustness 3
ip igmp send-router-alert
Description
The ip igmp sender-router-alert is used to configure the sending IGMP
messages to carry the router-alert option on specified interface. To disable this
function on this interface, please use no ip igmp send-router-alert command.
This function is enabled by default.
Syntax
ip igmp send-router-alert
no ip igmp send-router-alert
Command Mode
Interface Configuration Mode
Example
Configure the sending IGMP messages to carry the router-alert option on
interface VLAN 2:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip igmp send-router-alert