TP-Link JetStream T3700G-28TQ - ip igmp require-router-alert; ip igmp robustness

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
286
end-ip-address —— Specify the end IP address of the reserved IP pool. Only
one IP address will be reserved if the end IP address and the start IP address
are the same.
Command Mode
Global Configuration Mode
Example
Set the reserved IP addresses from 192.168.1.1 to 192.168.1.9:
T3700G-28TQ(config)# ip dhcp server exclude-address 192.168.1.1
192.168.1.9
ip dhcp server pool
Description
The ip dhcp server pool command is used to create the address pool of DHCP
Server and enter the dhcp configuration mode. To delete the address pool,
please use no ip dhcp server pool command.
Syntax
ip dhcp server pool pool-name
no ip dhcp server pool pool-name
Parameter
pool-name —— Specify the address pool name, ranging from 1 to 8 characters.
Command Mode
Global Configuration Mode
Example
Create the address pool of name POOL1:
T3700G-28TQ(config)# ip dhcp server pool POOL1
ip dhcp server ping timeout
Description
The ip dhcp server ping timeout command is used to specify the timeout of
PING process. To resume the default value, please use no ip dhcp server ping
timeout command.
Syntax
ip dhcp server ping timeout value