TP-Link JetStream T3700G-28TQ - access-list extended

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
178
show storm-control
Description
The show storm-control command is used to display the storm-control
information of an Ethernet port.
Syntax
show storm-control [ interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port } ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number or port list.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the storm-control information of port Gigabit Ethernet port 1/0/20:
T3700G-28TQ(config)#show storm-control interface gigabitEthernet 1/0/20
show bandwidth
Description
The show bandwidth command is used to display the bandwidth-limit
information of Ethernet port.
Syntax
show bandwidth [ interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port } ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number or port list.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the bandwidth-limit information of Gigabit Ethernet port 1/0/20: