T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
346
Syntax
default-metric metric
no default-metric
Parameter
metric —— Specify the default metric, ranging from 1 to 15. By default, it is 1.
Command Mode
Router Configuration Mode (router rip)
Example
Configure the default metric of RIP as 5:
T3700G-28TQ(config)# router rip
T3700G-28TQ(config-router)# default-metric 5
redistribute
Description
The redistribute command is used to enable RIP to redistribute external routes.
By default, it is disabled. To return to the default configuration, please use no
redistribute command.
Syntax
redistribute { static | ospf } metric metric-value
no redistribute { static | ospf } metric
Parameter
static —— Enable RIP to redistribute the external static routes.
ospf —— Enable RIP to redistribute the external OSPF routes.
metric-value —— Configure the metric for the added external route.
Command Mode
Router Configuration Mode (router rip)
Example
Enable RIP to redistribute the external static routes and specify the metric as 5:
T3700G-28TQ(config)# router rip
T3700G-28TQ(config-router)# redistribute static metric 5
To Next Page
Loading...
