T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
387
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LSDB summary information of Area 0 in process 1:
T3700G-28TQ# show ip ospf 1 area 0 database
show ip ospf area interface
Description
The show ip ospf area interface command is used to display the interface
information of the specified area.
Syntax
show ip ospf process-id area area-id interface [ brief | interface-name
interface-number ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id ——The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
brief—— Display the summary information of the interface.
interface-name interface-number—— Specify the interface name and number
to display the detailed information of this interface.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the detailed information of all the interfaces of Area 0 in process 1:
T3700G-28TQ# show ip ospf 1 area 0 interface
show ip ospf area neighbor
Description
The show ip ospf are neighbor command is used to display the neighbor
information of the specified area.
To Next Page
Loading...
