T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
140
Command Mode
Global Configuration Mode
Example
Specify the DST start time of the switch as 2:00 am on the first Sunday in May,
the end time as 2:00 am on the last Sunday in October and the offset as 45
minutes:
T3700G-28TQ(config)#system-time dst recurring first Sun May 02:00 last
Sun Oct 02:00 45
hostname
Description
The hostname command is used to configure the system name. To clear the
system name information, please use no hostname command.
Syntax
hostname hostname
no hostname
Parameter
hostname —— System Name, ranging from 1 to 32 characters. It is the
product name by default. Here it is T3700G-28TQ.
Command Mode
Global Configuration Mode
Example
Configure the system name as TPLINK:
T3700G-28TQ(config)#hostname TPLINK
location
Description
The location command is used to configure the system location. To clear the
system location information, please use no location command.
To Next Page
Loading...
