TP-Link JetStream T3700G-28TQ - Show Ip Ospf Request-List; Show Ip Ospf Retransmission-List

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
383
Example
Display the neighbors’ detailed information in process 1:
T3700G-28TQ# show ip ospf 1 neighbor detail
show ip ospf request-list
Description
The show ip ospf request-list command is used to display the LSA request list.
Syntax
show ip ospf [ process-Id ] request-list [ interface-name interface-number |
neighbor-id ]
Parameter
process-id —— The process ID, ranging from 1 to 65535. The LSA quest lists of
all processes will be displayed if no process ID is specified.
interface-name interface-number —— Specify the interface name and number
to display the LSA request list on this interface.
neighbor-id —— Specify the neighbor ID to display the LSA request list of this
neighbor.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LSA quest lists of all OSPF processes:
T3700G-28TQ# show ip ospf request-list
show ip ospf retransmission-list
Description
The show ip ospf retransmission-list is used to display the LSA
retransmission list.
Syntax
show ip ospf [ process-id ] retransmission-list [ interface-name
interface-number | neighbor-id ]