TP-Link JetStream T3700G-28TQ - radius server-account

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
89
T3700G-28TQ(config)#show ip source binding
show ip dhcp snooping
Description
The show ip dhcp snooping command is used to display the running status of
DHCP Snooping.
Syntax
show ip dhcp snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the running status of DHCP Snooping:
T3700G-28TQ#show ip dhcp snooping
show ip dhcp snooping interface
Description
The show ip dhcp snooping interface command is used to display the DHCP
Snooping configuration of a desired Fast/Gigabit Ethernet ports or of all
Ethernet ports.
Syntax
show ip dhcp snooping interface [ fastEthernet port | gigabitEthernet port ]
Parameters
port ——The Fast/Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the DHCP Snooping configuration of all Ethernet ports:
T3700G-28TQ#show ip dhcp snooping interface