TP-Link JetStream T3700G-28TQ - copy tftp startup-config

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
132
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the security configuration of Gigabit Ethernet port 1/0/20:
T3700G-28TQ(config)#show mac address-table max-mac-count interface
gigabitEthernet 1/0/20
show mac address-table interface
Description
The show mac address-table interface command is used to display the
address configuration of an Ethernet port.
Syntax
show mac address-table interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port }
Parameter
port —— The Fast/Gigabit/ten-Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the address configuration of Gigabit Ethernet port 1/0/1:
T3700G-28TQ(config)#show mac address-table interface gigabitEthernet
1/0/1
show mac address-table count
Description
The show mac address-table count command is used to display the total
amount of MAC address table.
Syntax
show mac address-table count [ unit unit-id ] [ vlan vlan-id ]