TP-Link JetStream T3700G-28TQ - Ip Ospf Transmit-Delay; Ip Ospf Priority

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
374
Command Mode
Interface Configuration Mode
Example
Configure the retransmission interval of interface VLAN 2 as 10 seconds:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip ospf retransmit-interval 10
ip ospf transmit-delay
Description
The ip ospf transmit-delay is used to configure the transmission delay of LSA
on the specified interface. To restore to default value, please use the no ip ospf
transmit-delay.
Syntax
ip ospf transmit-delay delay
no ip ospf transmit-delay
Parameter
delay—— The LSA transmission delay, ranging from 1 to 65535 seconds. The
default value is 1 second.
Command Mode
Interface Configuration Mode
Example
Configure the LSA transmission delay of interface VLAN 2 as 2 seconds.
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip ospf retransmit-delay 2
ip ospf priority
Description
The ip ospf priority is used to configure the priority of the specified interface.
To restore to the default value, please use the no ip ospf priority command.