TP-Link JetStream T3700G-28TQ - ip rip send version

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
329
show ip pim interface
Description
The show ip pim interface command is used to display the specified PIM
interface information. Using the show ip pim interface command without
parameters displays the detailed information of all the PIM interfaces.
Syntax
show ip pim interface [{ fastEthernet | gigabitEthernet | ten-gigabitEthernet }
port | loopback id | vlan vlan-id ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
id —— The interface loopback ID.
vlan-id —— The interface VLAN ID, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all PIM interfaces:
T3700G-28TQ(config)# show ip pim interface
show ip pim neighbor
Description
The show ip pim neighbor command is used to display PIM neighbor
information.
Syntax
show ip pim neighbor [ interface [ { fastEthernet | gigabitEthernet |
ten-gigabitEthernet } port | vlan vlan-id ] ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.