TP-Link JetStream T3700G-28TQ - user access-control port-based

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
55
show voice vlan switchport
Description
The show voice vlan switchport command is used to display the configuration
information of all the ports or one specified port in the Voice VLAN.
Syntax
show voice vlan switchport [fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port ——The Fast/Gigabit/Ten-Gigabit Ethernet port number selected to display
the configuration information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of Gigabit Ethernet port 1/0/1 in the Voice
VLAN:
T3700G-28TQ(config)#show voice vlan switchport gigabitEthernet 1/0/1
Display the configuration information of all the ports in the Voice VLAN:
T3700G-28TQ(config)#show voice vlan switchport