TP-Link JetStream T3700G-28TQ - ip dhcp relay information policy; ip dhcp relay information custom

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
277
Chapter 33 Static Routes Commands
interface vlan
Description
This interface vlan command is used to create the VLAN interface. To delete
the specified VLAN interface, please use the no interface vlan command.
Syntax
interface vlan { vid }
no interface vlan { vid }
Parameter
vid —— The ID of the VLAN.
Command Mode
Global Configuration Mode
Example
Create the VLAN interface 2:
T3700G-28TQ(config)# interface vlan 2
interface loopback
Description
This interface loopback command is used to create the loopback interface. To
delete the specified loopback interface, please use the no interface loopback
command.
Syntax
interface loopback { id }
no interface loopback { id }
Parameter
id —— The ID of the loopback interface, ranging from 1 to 2147483647.