TP-Link JetStream T3700G-28TQ - Spanning-Tree Mcheck; Show Spanning-Tree Active

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
220
Example
Enable the TC Protect of Spanning Tree for Gigabit Ethernet port 1/0/2:
T3700G-28TQ(config)#interface gigabitEthernet 1/0/2
T3700G-28TQ(config-if)#spanning-tree guard tc
spanning-tree mcheck
Description
The spanning-tree mcheck command is used to enable MCheck.
Syntax
spanning-tree mcheck
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet /
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Enable MCheck for Gigabit Ethernet port 1/0/2:
T3700G-28TQ(config)#interface gigabitEthernet 1/0/2
T3700G-28TQ(config-if)#spanning-tree mcheck
show spanning-tree active
Description
The show spanning-tree active command is used to display the active
information of spanning-tree.
Syntax
show spanning-tree active
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the active information of spanning-tree:
T3700G-28TQ(config)#show spanning-tree active