TP-Link JetStream T3700G-28TQ - show ip igmp groups static interface; show ip igmp groups static interface vlan

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
298
Command Mode
Global Configuration Mode
Example
Specify the remote ID as “TP-LINK”:
T3700G-28TQ(config)# ip dhcp relay information remote-id TP-LINK
show ip dhcp relay
Description
The show ip dhcp relay command is used to display the configuration of DHCP
Relay.
Syntax
show ip dhcp relay
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of DHCP Relay:
T3700G-28TQ(config)# show ip dhcp relay