TP-Link JetStream T3700G-28TQ - area virtual-link

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
350
Command Mode
Interface Configuration Mode
Example
Configure the RIP authentication mode of interface VLAN2 as simple, and
specify its key as 123:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip rip authentication-mode simple 123
ip rip poison-reverse
Description
The ip rip poison-reverse command is used to enable poison reverse function
on the desired interface. To disable the poison reverse function, please use no
ip rip poison-reverse command.
Syntax
ip rip poison-reverse
no ip rip poison-reverse
Command Mode
Interface Configuration Mode
Example
Enable poison reverse function on the interface VLAN2:
T3700G-28TQ(config)# interface vlan 2
T3700G-28TQ(config-if)# ip rip poison-reverse
ip rip split-horizon
Description
The ip rip split-horizon command is used to enable split horizon function on
the desired interface. To disable the split horizon function, please use no ip rip
split-horizon command.
Syntax
ip rip split-horizon