T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
236
Chapter 30 SNMP Commands
SNMP (Simple Network Management Protocol) functions are used to manage the network devices
for a smooth communication, which can facilitate the network administrators to monitor the
network nodes and implement the proper operation.
snmp-server
Description
The snmp-server command is used to enable the SNMP function. By default, it
is disabled. To return to the default configuration, please use no snmp-server
command.
Syntax
snmp-server
no snmp-server
Command Mode
Global Configuration Mode
Example
Enable the SNMP function:
T3700G-28TQ(config)#snmp-server
snmp-server view
Description
The snmp-server view command is used to add View. To delete the
corresponding View, please use no snmp-server view command. The OID
(Object Identifier) of the SNMP packets is used to describe the managed objects
of the switch, and the MIB (Management Information Base) is the set of the
OIDs. The SNMP View is created for the SNMP management station to manage
MIB objects.
Syntax
snmp-server view name mib-oid {include | exclude}
no snmp-server view name mib-oid
To Next Page
Loading...
