TP-Link JetStream T3700G-28TQ - exit; end; show protocol-vlan template

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
24
T3700G-28TQ#configure
T3700G-28TQ(config)#
exit
Description
The exit command is used to return to the previous Mode from the current
Mode.
Syntax
exit
Command Mode
Any Configuration Mode
Example
Return to Global Configuration Mode from Interface Configuration Mode, and
then return to Privileged EXEC Mode:
T3700G-28TQ(config-if)#exit
T3700G-28TQ(config)#exit
T3700G-28TQ#
end
Description
The end command is used to return to Privileged EXEC Mode.
Syntax
end
Command Mode
Any Configuration Mode
Example
Return to Privileged EXEC Mode from Interface Configuration Mode:
T3700G-28TQ(config-if)#end