EasyManua.ls Logo

TP-Link JetStream T3700G-28TQ - show ip pim interface; show ip pim neighbor

TP-Link JetStream T3700G-28TQ
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
310
Add the forwarding port 1/0/2 to the static multicast group 225.1.1.2, and it will
receive traffic from all sources:
T3700G-28TQ(config)# interface gigabitEthernet 1/0/2
T3700G-28TQ(config-if) no switchport
T3700G-28TQ(config-if)# ip igmp static-group 225.1.1.2
ip igmp profile
Description
The ip igmp profile command is used to create the configuration profile. To
delete the corresponding profile, please use no ip igmp profile command.
Syntax
ip igmp profile id
no ip igmp profile id
Parameter
id —— Specify the id of the configuration profile.
Command Mode
Global Configuration Mode
Example
Create the profile 1:
T3700G-28TQ(config)# ip igmp profile 1
deny
Description
The deny command is used to configure the filtering mode of profile as deny.
Syntax
deny
Command Mode
Profile Configuration Mode
Example
Configure the filtering mode of profile 1 as deny:

Table of Contents

Related product manuals