T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
56
Chapter 9 Private VLAN Commands
Private VLANs are configured specially for saving VLAN resource of uplink devices and decreasing
broadcast.
private-vlan primary
Description
The private-vlan primary command is used to configure the designated VLAN
as the primary VLAN of the Private VLAN. To abolish the currently primary
VLAN, please use no private-vlan primary command.
Syntax
private-vlan primary
no private-vlan primary
Command Mode
VLAN Configuration Mode (VLAN)
Example
Configure the VLAN 3 as the primary VLAN of the private VLAN:
T3700G-28TQ(config)#vlan 3
T3700G-28TQ(config-vlan)#private-vlan primary
private-vlan community
Description
The private-vlan community command is used to configure the designated
VLAN as the community VLAN of the Private VLAN. To abolish the currently
community VLAN, please use no private-vlan community command.
Syntax
private-vlan community
no private-vlan community
To Next Page
Loading...
