TP-Link JetStream T3700G-28TQ - hostname; location

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
121
Command Mode
Global Configuration Mode
Example
Enable SSH v2:
T3700G-28TQ(config)#ip ssh version v2
ip ssh timeout
Description
The ip ssh timeout command is used to specify the idle-timeout time of SSH.
To restore to the factory defaults, please use ip ssh timeout command.
Syntax
ip ssh timeout value
no ip ssh timeout
Parameter
value —— The Idle-timeout time. During this period, the system will
automatically release the connection if there is no operation from the client. It
ranges from 1 to 999 in seconds. By default, this value is 500 seconds.
Command Mode
Global Configuration Mode
Example
Specify the idle-timeout time of SSH as 100 seconds:
T3700G-28TQ(config)#ip ssh timeout 100
ip ssh max-client
Description
The ip ssh max-client command is used to specify the maximum number of the
connections to the SSH server. To return to the default configuration, please use
no ip ssh max-client command.
Syntax
ip ssh max-client num