T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
211
Example
Map the VLANs 1-100 to Instance 1:
T3700G-28TQ(config)#spanning-tree mst configuration
T3700G-28TQ(config-mst)#instance 1 vlan 1-100
Disable Instance 1, namely remove all the maping VLANs 1-100:
T3700G-28TQ(config)#spanning-tree mst configuration
T3700G-28TQ(config-mst)#no instance 1
Remove VLANs 1-50 in maping VLANs 1-100 for Instance 1:
T3700G-28TQ(config)#spanning-tree mst configuration
T3700G-28TQ(config-mst)#no instance 1 vlan 1-50
name
Description
The name command is used to configure the region name of MST instance.
Syntax
name name
Parameters
name —— The region name, used to identify MST region. It ranges from 1 to
32 characters.
Command Mode
MST Configuration Mode
Example
Configure the region name of MST as “region1”:
T3700G-28TQ(config)#spanning-tree mst configuration
T3700G-28TQ(config-mst)#name region1
revision
Description
The revision command is used to configure the revision level of MST instance.
Syntax
revision revision
To Next Page
Loading...
