TP-Link JetStream T3700G-28TQ - show vlan private-vlan interface

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
42
T3700G-28TQ(config)#protocol-vlan template name TP frame ether_2
ether-type 2024
protocol-vlan vlan
Description
The protocol-vlan vlan command is used to create a Protocol-based VLAN
entry. To delete a Protocol-based VLAN entry, please use no protocol-vlan
vlan command.
Syntax
protocol-vlan vlan vlan-id template template-idx
no protocol-vlan vlan group-idx
Parameter
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1-4094.
template-idx ——The number of the Protocol-based VLAN Template. You can
get the template corresponding to the number by the show protocol-vlan
template command.
group-idx ——The number of the Protocol-based VLAN entry. You can get the
Protocol-based VLAN entry corresponding to the number by the show
protocol-vlan vlan command.
Command Mode
Global Configuration Mode
Example
Create Protocol-based VLAN 2 and bind it with Protocol-based VLAN Template 3:
T3700G-28TQ(config)#protocol-vlan vlan 2 template 3
protocol-vlan
Description
The protocol-vlan command is used to enable the Protocol-based VLAN
feature for a specified port. To disable the Protocol-based VLAN feature of this