TP-Link JetStream T3700G-28TQ - logging file flash

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
94
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet /
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Restore Gigabit Ethernet port 1/0/5 to the ARP transmit status:
T3700G-28TQ(config)#interface gigabitEthernet 1/0/5
T3700G-28TQ(config-if)#ip arp inspection recover
show ip arp inspection
Description
The show ip arp inspection command is used to display the ARP detection
global configuration including the enable/disable status and the Trusted Port list.
Syntax
show ip arp inspection
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ARP detection configuration globally:
T3700G-28TQ(config)#show ip arp inspection
show ip arp inspection interface
Description
The show ip arp inspection interface command is used to display the
interface configuration of ARP detection.
Syntax
show ip arp inspection interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]