TP-Link JetStream T3700G-28TQ - show vlan private-vlan

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
41
Chapter 6 Protocol-based VLAN Commands
Protocol VLAN (Virtual Local Area Network) is the way to classify VLANs based on Protocols. A
Protocol is relative to a single VLAN ID. The untagged packets and the priority-tagged packets
matching the protocol template will be tagged with this VLAN ID.
protocol-vlan template
Description
The protocol-vlan template command is used to create Protocol-based VLAN
template. To delete Protocol-based VLAN template, please use no
protocol-vlan template command.
Syntax
protocol-vlan template name protocol-name frame { ether_2 ether-type type
| snap ether-type type | llc dsap dsap_type ssap ssap_type }
no protocol-vlan template template-idx
Parameter
protocol-name —— Give a name for the Protocol-based VLAN Template ,
which contains 8 characters at most.
ether_2 ether-type type —— Specify the Ethernet type.
snap ether-type type —— Specify the Ethernet type.
llc dsap dsap_type ssap ssap_type —— Specify the DSAP type and the SSAP
type.
template-idx —— The number of the Protocol-based VLAN Template. You can
get the template corresponding to the number by the show protocol-vlan
template command.
Command Mode
Global Configuration Mode
Example
Create a Protocol-based VLAN template named “TP” whose Ethernet protocol
type is 0x2024: