TP-Link JetStream T3700G-28TQ - show ip route; show ip route specify

T3700G-28TQ JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
264
Example
Configure the civic address in the Location Identification TLV's content in
outgoing LLDPDU of port 1/0/2. Configure the language as English and city as
London:
T3700-28TQ (config)# interface gigabitEthernet 1/0/2
T3700-28TQ(config-if)# lldp med-location civic-address language English
city London
show lldp
Description
The show lldp command is used to display the global configuration of LLDP.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of LLDP:
T3700G-28TQ#show lldp
show lldp interface
Description
The show lldp interface command is used to display LLDP configuration of the
corresponding port. By default, the LLDP configuration of all the ports will be
displayed.
Syntax
show lldp interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number.